备份juniper 的sceeenOS

  首先在tftp服务器上启动tftp server(本例中使用的是Cisco TFTP Server):

  检查从Juniper防火墙到TFTP Server网络连通性:

  netscreen_isg1000-> ping 10.245.33.11

  Type escape sequence to abort

  Sending 5, 100-byte ICMP Echos to 10.245.33.11, timeout is 1 seconds

  !!!!!

  Success Rate is 100 percent (5/5), round-trip time min/avg/max=0/0/1 ms

  然后在CLI方式下输入save software from flash to tftp 10.245.33.11 CurrentOS.bin命令,如下所示:  your name

  netscreen_isg1000-> save software from flash to tftp 10.245.33.11 CurrentOS.bin

  Load image from flash.

  Save software to TFTP 10.245.33.11 (file: CurrentOS.bin). It may take a few minutes …

  Type escape sequence to abort

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!D!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!D!!!!!!!!!!!!!!!!!!!!!!!!!!!

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  !!!!!!!!!!!!!!!!!!!!!

  完成后在C:Program FilesCisco SystemsCisco TFTP Server目录会有一个文件名为CurrentOS.bin的文件,备份好这个文件即可。

 

发表评论

邮箱地址不会被公开。 必填项已用*标注